Monel 400 na'ura mai aiki da karfin ruwa Line Tube

Takaitaccen Bayani:

Welded Control Lines ne aka fi so yi don sarrafawa Lines da ake amfani da downhole mai da gas aikace-aikace.Ana amfani da layukan sarrafa mu na walda a cikin SCSSV, Injection Chemical, Cigaba da Kammala Rijiyar, da Aikace-aikacen Ma'auni.Muna ba da layukan sarrafawa iri-iri.(TIG Welded, da filogi mai iyo da aka zana, da kuma layi tare da kayan haɓakawa) Daban-daban matakai suna ba mu ikon tsara mafita don saduwa da cikar rijiyar ku.

Aika mana imel

Cikakken Bayani

Tags samfurin

Gabatarwar samfur

Meilong Tube ya kera musamman maras sumul da ja, welded da jajayen bututun nada wanda aka yi daga austenitic mai jure lalata, duplex, super duplex bakin karfe da maki nickel gami.Ana amfani da bututun azaman layin sarrafa ruwa da layin alluran sinadarai musamman masu ba da man fetur da iskar gas, masana'antar geothermal.

Muhimmanci

Kowane coil na tubing guda ɗaya yana da tsayin daka gaba ɗaya ba tare da walda na orbital ba.

Kowane coil na tubing guda ɗaya an gwada shi da matsi mai niyya.

Masu dubawa na ɓangare na uku na iya ba da shaidar gwajin akan wurin (SGS, BV, DNV).

Sauran gwaje-gwajen sune gwajin halin yanzu, sinadarai, lallasa, flaring, tensile, yawan amfanin ƙasa, tsawo, tauri don ingancin kayan.

Nuni samfurin

Monel 400 na'ura mai aiki da karfin ruwa Line Tube (2)

Monel 400 na'ura mai aiki da karfin ruwa Line Tube (3)

Hakuri Mai Girma

ASTM B730 / ASME SB730, Monel 400, UNS N04400
ASTM B751 / ASME SB751
Girman OD	Hakuri OD	Hakuri WT
1/8''	± 0.004" (± 0.10 mm)	± 12.5%
5/8'≤OD≤1'' (15.88≤OD≤25.4 mm)	± 0.0075" (± 0.19 mm)	± 12.5%

Meilong Standard
Girman OD	Hakuri OD	Hakuri WT
1/8''	± 0.004" (± 0.10 mm)	± 10%
5/8'≤OD≤1'' (15.88≤OD≤25.4 mm)	± 0.004" (± 0.10 mm)	± 8%

ASTM B165 / ASME SB165, Monel 400, UNS N04400
Girman OD	Hakuri OD	Hakuri WT
1/8'' ≤OD <3/16'' (3.18≤OD <4.76 mm)	+0.003'' (+0.08 mm) / -0	± 10%
3/16''≤OD <1/2'' (15.88≤OD <12.7 mm)	+0.004'' (+0.10 mm) / -0	± 10%
1/2 ''≤OD≤1'' (12.7≤OD≤25.4 mm)	+0.005'' (+0.13 mm) / -0	± 10%

Meilong Standard
Girman OD	Hakuri OD	Hakuri WT
1/8'' ≤OD <3/16'' (3.18≤OD <4.76 mm)	+0.003'' (+0.08 mm) / -0	± 10%
3/16''≤OD <1/2'' (15.88≤OD <12.7 mm)	+0.004'' (+0.10 mm) / -0	± 10%
1/2 ''≤OD≤1'' (12.7≤OD≤25.4 mm)	+0.004'' (+0.10 mm) / -0	± 8%